2A 42mmx61mm 1.8 Degree Nema 17 Stepper Motor With Encoder

42mm*80mm Encoder Stepping Motor Standard Type NEMA17 1.8 step motor

Product description

1. Automatic machine operation, stable automatic work, high processing efficiency.

2. Material quality: The coat is 304 stainless steel, the water jacket is the high compression casting aluminum tube, the red copper coil.

3. Mechanical size 100% meet the requirements, to ensure that there is no greater error in the use proces

5. Accurate position Control

The angular displacement of the stepping motor can be precise controlled by the number of electrical pulses.Angle accuracy can be controlled within ±0.09°without any feedback devices.

4. The material is selected from well-known manufacturers at home and abroad. The advantages are light weight, good heat dissipation performance, good thermal conductivity, die-casting, good plasticity, higher elongation than iron, low noise, good motion stability, the disadvantages are high price, low hardness

Specifications

Encoder Specifications

Applications:

• Used for robots stepper motor
• electronic automatic equipment stepping motor
• Medical instrument stepping motor
• Advertising instrument stepper motor
• Medical equipment
• Effective angle and speed control
• Textile machineryIndustrial automationOffice automation
• Transmission equipment
• Position location control
• Multi axis mechanical arm

Working principle of stepper motor

To make the motor shaft turn, first one electromagnet is given power, which makes the gear’s teeth magnetically attracted to the electromagnet’s teeth. The point when the gear’s teeth are thus aligned to the first electromagnet, they are slightly offset from the next electromagnet. So when the next electromagnet is turned ON and the first is turned OFF, the gear rotates slightly to align with the next one and from there the process is repeated. Each of those slight rotations is called a step, with an integer number of steps making a full rotation. In that way, the motor can be turned by a precise. Stepper motor doesn’t rotate continuously, they rotate in steps. There are 4 coils with a 90o angle between each other fixed on the stator. The stepper motor connections are determined by the way the coils are interconnected. In a stepper motor, the coils are not connected. The motor has a 90o rotation step with the coils being energized in a cyclic order, determining the shaft rotation direction. The working of this motor is shown by operating the switch. The coils are activated in series in 1-sec intervals. The shaft rotates 90o each time the next coil is activated. Its low-speed torque will vary directly with current.

2A Nema 17 Stepper Motor With Encoder

1.8 Degree Nema 17 Stepper Motor With Encoder

nema 17 holding torque

2A 42mmx61mm 1.8 Degree Nema 17 Stepper Motor With Encoder Images