CNC Machine 28mm Nema 11 0.036N.M Hybrid Stepper Motor

Encoder stepper motor of Specifications

• 1. Shaft Dia= 5mm
• 2. Step Angle: 1.8
• 3. Phase Current 1.2A
• 4. Phase Resistance: 1 .5Ohm
• 5. Phase Inductance: 2.8mH
• 6. Holding Torque: 40N.cm
• 7. Braking Torque: 2.2N.cm
• 8. Rotor Inertia: 54g.cm32;
• 9. Wire: 4(Blue, green, black, red)
• 10. Max. Temperature Rise: 80"C (rated current, 2 phase on)11. Operating Temperature: -20*C-+70"C
• 11. Insulation Resistance: 100 MQ Min., 500VDC
• 12. Radial Clearance: 0.02Max, (450g-Load)
• 13. Axial Clearance: 0.08Max. (450g-Load)

Product description of encoder stepper motor

1. Material quality: The coat is 304 stainless steel, the water jacket is the high compression casting aluminum tube, the red copper coil.

2. The forward /reverse rotation of the stepping motor can be controlled by the input sequence of the controlled electric pulses.

3. Strictly control the production of parts to improve the quality of parts

4. .Automatic machine operation, stable automatic work, high processing efficiency.

   Mechanical size 100% meet the requirements, to ensure that there is no greater error in the use process

5. Longer Life

   Stepping motor is a mechanical structure,which does not need be changed by electric brush or Hall sensor,thus reducing the probability and increasing the motor life.Stepping motor life usually determined by the life of the bearing.

NEMA11 Encoder stepper motor 2 phase hybrid 1.8 degree stepper motor

Encoder stepper motor Application

Stepper motors are diverse in their uses, but some of the most common include:

• 3D printing equipment
• Textile machines
• Printing presses
• Gaming machines
• Medical imaging machinery
• Small robotics
• CNC milling machines
• Welding equipment

Advantage of Product

• Prostepper motor use of a unique stator the chnology to ensure that the motor stator teeth grinding and smooth high accuracy of the hole, the work of the process of speed stability is not lose step
• Prostepper motorcoil is made of 100% pure copper enameled wire , advanced winding threading process, copper wire is evenly arranged, good overall motor stability , the long time does not appear deformation and noise and so on.
• High quality motor steel, the load on the shaft can produce high torque the inertia ratio, and can eliminate, the system error due to the use of reduction gears

Working principle of stepper motor

To make the motor shaft turn, first one electromagnet is given power, which makes the gear’s teeth magnetically attracted to the electromagnet’s teeth. The point when the gear’s teeth are thus aligned to the first electromagnet, they are slightly offset from the next electromagnet. So when the next electromagnet is turned ON and the first is turned OFF, the gear rotates slightly to align with the next one and from there the process is repeated. Each of those slight rotations is called a step, with an integer number of steps making a full rotation. In that way, the motor can be turned by a precise. Stepper motor doesn’t rotate continuously, they rotate in steps. There are 4 coils with a 90o angle between each other fixed on the stator. The stepper motor connections are determined by the way the coils are interconnected. In a stepper motor, the coils are not connected. The motor has a 90o rotation step with the coils being energized in a cyclic order, determining the shaft rotation direction. The working of this motor is shown by operating the switch. The coils are activated in series in 1-sec intervals. The shaft rotates 90o each time the next coil is activated. Its low-speed torque will vary directly with current.

​

Nema 11 Hybrid Stepper Motor

1A Hybrid Stepper Motor

28mm bipolar motor

CNC Machine 28mm Nema 11 0.036N.M Hybrid Stepper Motor Images